Disclaimer    Site Map    Careers    Media Centre    Contact    About us
Search

creating better environments
CMS notification
01.01.2009
You can define your local information in this trigger with links.
CMS notification
01.01.2009
You can define your local information in this trigger with links.
Visit following Websites
> Archidea
Marmoleum

Maintenance and care
Simple and efficient
All our Marmoleum products have a Topshield finish which makes cleaning and maintenance easy. Dust wiping is a quick and easy way to keep your floor dust-free.

Regular use of Forbo Monel creates a good protection through a film, which inhibits the adhesion of dirt and is removed during the next maintenance action. In this way the original appearance of the floor is retained.
Daily cleaning
Remove dust and loose dirt regularly with a dust wiper
Remove stains with Monel and a slightly damp mop
Periodical cleaning
Remove loose dust and dirt with a dust wiper
Clean the floor using Monel and a mop (0.25 l Monel / 10 l water)
Allow floor to dry
Occasional maintenance
Although domestically probably not relevant, intensive use can lead to excess wear of your floor.
The original look can be restored as follows:
  • Scrub the floor using Monel and a scrub brush (0.25 l Monel / 10 l water)
  • Remove dirty water with wiper and mop or water vac
  • Now mop with clean water and allow to dry
  • Apply Monel film with the mop (0.25 l Monel / 10 l water).
    Allow floor to dry Packaging
  • Bottle of Forbo Monel 1 l
  • Bottle of Forbo Monel 2.5 l

    Requirements
    Forbo dust wiper with cloths – for quick and easy dry maintenance
    Would you like to know more about maintenance of your Marmoleum floor? Check out the Forbo Floor Care folder.
     
  •  
    Novilon / Novilux

    Forbo Novilon and Novilux are protected by the strong protective finish of Diamond Seal and Diamond Seal XS. This makes cleaning and maintenance very simple indeed. All products can be cleaned with the same simple method:
    In normal use sweep or vacuum the floor to remove loose dirt and grit. Wash regularly afterwards with Forbo Monel and water (50 ml/10 l water) to remove spots and clean the floor.
    After very intense use or a longer period of time you can also apply Monel film using Forbo Monel solution (250 ml/5 l water) and mop. Please allow floor to dry.
    This method greatly reduces effort and time spent on keeping your floor in shape