Disclaimer    Site Map    Careers    Media Centre    Contact    About us
Search

creating better environments
Visit following Websites
Installation products for ESD & cleanroom flooring
 
Levelling compounds
 
975 Europlan Special

For levelling cement-based and other stony floors in layers up to 8 mm. If applying by pump: Consult pump supplier, ensure the pump is suitable for all types of levelling compounds.

  • Very low VOC-emission
  • Emicode EC 1
  • Self-smoothing
  • High flow; pumpable
  • Maximum layer thickness of 8 mm
  • Roller-castor-chair resistant from 2 mm

    Package: 25 kg
    Spreading capacity: Approx. 1.5 kg/m² per mm of layer thickness.  
    •  
    990 Europlan Direct

    Self-smoothing, very high quality levelling compound, especially for critical, stony subfloors in layers up to 20 mm.

  • Self-smoothing; low-tension
  • In most cases a primer is not required
  • Excellent flow; pumpable
  • High compression strength
  • Maximum layer thickness of 20 mm; roller-castor-chair resistant from 1 mm
  • Suitable for use under parquet floors

    Package: 25 kg
    Spreading capacity: Approx. 1.5 kg/m² per mm of layer thickness.  
    •  
    991 Europlan Direct Rapid

    Self-smoothing, very high quality and fast drying levelling compound for stony subfloors

  • Very low VOC-emission
  • Emicode EC 1
  • Fast drying
  • After 3-4 hours ready for installation
  • Low-tension
  • In most cases a primer is not required
  • Excellent flow
  • High compression strength
  • Maximum layer thickness of 20 mm  
    •  
    ESD flooring
     
    Primers
     
    041 Europrimer EL

    Primer for reducing the need of using the copper strip system and of conductive levelling compounds when installing a conductive floor covering.

  • Solvent-free
  • Non-flammable
  • Favourable spreading capacity
  • Conductivity < 105 Ohm, measured in accordance with DIN 53 276.

    Package : 10 l. (10 kg)
    Spreading capacity: 5 – 10 m² /litre  
    •  
    Adhesive
     
    641 Eurostar Special EL

    Solvent-free adhesive with a high initial grab for conductive floor covering

  • Very low VOC-emission
  • Emicode EC 1
  • Solvent-free
  • Non-flammable
  • Easy and safe to apply
  • Multi-purpose application
  • High initial adhesion strength
  • Favourable spreading capacity
  • Roller-castor-chair resistant
  • Electrical resistance < 3.105 Ohm (EN 13 415)

    Package: 10 l. (12 kg)
    Spreading capacity: .0-3.5 m2/l 
    •  
    Cleanroom flooring
     
    Seal
     
    026 Euroblock Multi

    Solvent-free moisture-sealant for suppressing residual moisture in sand/cement floors.

  • Solvent-free
  • Easy application
  • Favourable spreading capacity
  • Non-flammable
  • Fast drying

    Package: 10l. (12.4 kg)
    Spreading capacity: First layer (diluted 1:1 with water) 15-25 m² /litre . Second and third layer (undiluted) 8-12 m² /litre, per layer. 
    •  
    Primers
     
    049 Europrimer ABS

    Primer for improved tack of levelling compounds onto absorbent (porous) subfloors

  • Easy application
  • Improves the top layer of pervious or stony floors Favourable spreading capacity
  • Suitable for any type of subfloor that is smooth, sound, clean and permanently dry

    Package: 10 l. (12.4 kg)
    Spreading capacity: 5-15 m² /litre, depending on application

     
    •  
    049 Europrimer ABS

    Primer for improved tack of levelling compounds onto absorbent (porous) subfloors

  • Easy application
  • Improves the top layer of pervious or stony floors Favourable spreading capacity
  • Suitable for any type of subfloor that is smooth, sound, clean and permanently dry

    Package: 10 l. (12.4 kg)
    Spreading capacity: 5-15 m² /litre, depending on application
     
    •  
    044 Europrimer Multi

    Primer for improving the adhesion of levelling compounds and cement-based tile adhesives on non-absorbent subfloors.

  • Universal application
  • Very low VOC-emission
  • Favourable spreading capacity

    Package: l. (10 kg)
    Spreading capacity: 5 – 10 m² /litre, depending on application
     
    •  
    Adhesive
     
    540 Eurosafe Special

    Solvent-free floor covering adhesive with a high initial grab

  • solvent-free
  • quick-bonding
  • high initial tack and bond strength
  • castor-resistant
  • favourable spreading capacity

    Usage: 3.0-3.5 m2/l
    Package: 10 l 
    •  
    640 Eurostar Special

    Very low VOC-emission adhesive with a high initial grab for vinyl, polyolefin and rubber floor covering

  • Very low VOC-emission
  • Emicode EC 1
  • Solvent-free
  • Non-flammable
  • Multi-purpose application
  • Easy and safe to apply
  • Favourable spreading capacity
  • High initial adhesion strength and final bond strength
  • Roller-castor-chair resistant

    Package:10 l. (12 kg)
    Spreading capacity: 3.25-3.75 m2/l
     
    •  
    546 Eurofix Multi

    Multi-purpose release adhesive for cushion vinyl and PVC backed carpet

  • Solvent-free
  • Non-flammable
  • Permanent high adhesion
  • Easy removal
  • Favourable spreading capacity
  • Roller-castor-chair resistant

    Package: 10 kg
    Spreading capacity: 100-200 g/m²
     
    •  
    650 Eurostar Fastcol

    Low VOC-emission, solvent-free and powerful dispersion-based contact adhesive with a strong adhesion

  • Low VOC-emission
  • Emicode EC 2
  • Solvent-free
  • Powerful enough to bear high tensions
  • High initial adhesion strength
  • Reactivate through warmth
  • Tool included

    Package: 5 l. (12 kg)
    Spreading capacity: 250 g/m² per coat. 
    •